The Bash Shell Startup Files

The shell program /bin/bash (hereafter referred to as just "the shell") uses a collection of startup files to help create an environment. Each file has a specific use and may affect login and interactive environments differently. The files in the /etc directory generally provide global settings. If an equivalent file exists in your home directory it may override the global settings.

An interactive login shell is started after a successful login, using /bin/login, by reading the /etc/passwd file. This shell invocation normally reads /etc/profile and its private equivalent ~/.bash_profile upon startup.

An interactive non-login shell is normally started at the command-line using a shell program (e.g., [prompt]$/bin/bash) or by the /bin/su command. An interactive non-login shell is also started with a terminal program such as xterm or konsole from within a graphical environment. This type of shell invocation normally copies the parent environment and then reads the user's ~/.bashrc file for additional startup configuration instructions.

A non-interactive shell is usually present when a shell script is running. It is non-interactive because it is processing a script and not waiting for user input between commands. For these shell invocations, only the environment inherited from the parent shell is used.

The file ~/.bash_logout is not used for an invocation of the shell. It is read and executed when a user exits from an interactive login shell.

Many distributions use /etc/bashrc for system wide initialization of non-login shells. This file is usually called from the user's ~/.bashrc file and is not built directly into bash itself. This convention is followed in this section.

For more information see info bash -- Nodes: Bash Startup Files and Interactive Shells.

[Note]

Note

Most of the instructions below are used to create files located in the /etc directory structure which requires you to execute the commands as the root user. If you elect to create the files in user's home directories instead, you should run the commands as an unprivileged user.

/etc/profile

Here is a base /etc/profile. This file starts by setting up some helper functions and some basic parameters. It specifies some bash history parameters and, for security purposes, disables keeping a permanent history file for the root user. It also sets a default user prompt. It then calls small, single purpose scripts in the /etc/profile.d directory to provide most of the initialization.

For more information on the escape sequences you can use for your prompt (i.e., the PS1 environment variable) see info bash -- Node: Printing a Prompt.

cat > /etc/profile << "EOF"
# Begin /etc/profile
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>
# modifications by Dagmar d'Surreal <rivyqntzne@pbzpnfg.arg>

# System wide environment variables and startup programs.

# System wide aliases and functions should go in /etc/bashrc.  Personal
# environment variables and startup programs should go into
# ~/.bash_profile.  Personal aliases and functions should go into
# ~/.bashrc.

# Functions to help us manage paths.  Second argument is the name of the
# path variable to be modified (default: PATH)
pathremove () {
        local IFS=':'
        local NEWPATH
        local DIR
        local PATHVARIABLE=${2:-PATH}
        for DIR in ${!PATHVARIABLE} ; do
                if [ "$DIR" != "$1" ] ; then
                  NEWPATH=${NEWPATH:+$NEWPATH:}$DIR
                fi
        done
        export $PATHVARIABLE="$NEWPATH"
}

pathprepend () {
        pathremove $1 $2
        local PATHVARIABLE=${2:-PATH}
        export $PATHVARIABLE="$1${!PATHVARIABLE:+:${!PATHVARIABLE}}"
}

pathappend () {
        pathremove $1 $2
        local PATHVARIABLE=${2:-PATH}
        export $PATHVARIABLE="${!PATHVARIABLE:+${!PATHVARIABLE}:}$1"
}


# Set the initial path
export PATH=/bin:/usr/bin

if [ $EUID -eq 0 ] ; then
        pathappend /sbin:/usr/sbin
        unset HISTFILE
fi

# Setup some environment variables.
export HISTSIZE=1000
export HISTIGNORE="&:[bf]g:exit"
#export PS1="[\u@\h \w]\\$ "
export PS1='\u@\h:\w\$ '

for script in /etc/profile.d/*.sh ; do
        if [ -r $script ] ; then
                . $script
        fi
done

# Now to clean up
unset pathremove pathprepend pathappend

# End /etc/profile
EOF

The /etc/profile.d Directory

Now create the /etc/profile.d directory, where the individual initialization scripts are placed:

install --directory --mode=0755 --owner=root --group=root /etc/profile.d

/etc/profile.d/dircolors.sh

This script uses the ~/.dircolors and /etc/dircolors files to control the colors of file names in a directory listing. They control colorized output of things like ls --color. The explanation of how to initialize these files is at the end of this section.

cat > /etc/profile.d/dircolors.sh << "EOF"
# Setup for /bin/ls to support color, the alias is in /etc/bashrc.
if [ -f "/etc/dircolors" ] ; then
        eval $(dircolors -b /etc/dircolors)

        if [ -f "$HOME/.dircolors" ] ; then
                eval $(dircolors -b $HOME/.dircolors)
        fi
fi
alias ls='ls --color=auto'
EOF

/etc/profile.d/extrapaths.sh

This script adds several useful paths to the PATH and PKG_CONFIG_PATH environment variables. If you want, you can uncomment the last section to put a dot at the end of your path. This will allow executables in the current working directory to be executed without specifiying a ./, however you are warned that this is generally considered a security hazard.

cat > /etc/profile.d/extrapaths.sh << "EOF"
if [ -d /usr/local/lib/pkgconfig ] ; then
        pathappend /usr/local/lib/pkgconfig PKG_CONFIG_PATH
fi
if [ -d /usr/local/bin ]; then
        pathprepend /usr/local/bin
fi
if [ -d /usr/local/sbin -a $EUID -eq 0 ]; then
        pathprepend /usr/local/sbin
fi
for directory in $(find /opt/*/lib/pkgconfig -type d 2>/dev/null); do
        pathappend $directory PKG_CONFIG_PATH
done
for directory in $(find /opt/*/bin -type d 2>/dev/null); do
        pathappend $directory
done
if [ -d ~/bin ]; then
        pathprepend ~/bin
fi
#if [ $EUID -gt 99 ]; then
#        pathappend .
#fi
EOF

/etc/profile.d/readline.sh

This script sets up the default inputrc configuration file. If the user does not have individual settings, it uses the global file.

cat > /etc/profile.d/readline.sh << "EOF"
# Setup the INPUTRC environment variable.
if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ] ; then
        INPUTRC=/etc/inputrc
fi
export INPUTRC
EOF

/etc/profile.d/tinker-term.sh

Some applications need a specific TERM setting to support color.

cat > /etc/profile.d/tinker-term.sh << "EOF"
# This will tinker with the value of TERM in order to convince certain
# apps that we can, indeed, display color in their window.

if [ -n "$COLORTERM" ]; then
  export TERM=xterm-color
fi

if [ "$TERM" = "xterm" ]; then
  export TERM=xterm-color
fi
EOF

/etc/profile.d/umask.sh

Setting the umask value is important for security. Here the default group write permissions are turned off for system users and when the user name and group name are not the same.

cat > /etc/profile.d/umask.sh << "EOF"
# By default we want the umask to get set.
if [ "$(id -gn)" = "$(id -un)" -a $EUID -gt 99 ] ; then
  umask 002
else
  umask 022
fi
EOF

/etc/profile.d/X.sh

If X is installed, the PATH and PKG_CONFIG_PATH variables are also updated.

cat > /etc/profile.d/X.sh << "EOF"
if [ -x /usr/X11R6/bin/X ]; then
        pathappend /usr/X11R6/bin
fi
if [ -d /usr/X11R6/lib/pkgconfig ] ; then
        pathappend /usr/X11R6/lib/pkgconfig PKG_CONFIG_PATH
fi
EOF

/etc/profile.d/extra-prompt.sh

This script shows an example of a different way of setting the prompt. The normal variable, PS1, is supplemented by PROMPT_COMMAND. If set, the value of PROMPT_COMMAND is executed as a command prior to issuing each primary prompt. The sequence \e is an ESC character. \a is a BEL character. For a reference on xterm escape sequences, see http://rtfm.etla.org/xterm/ctlseq.html.

cat > /etc/profile.d/extra-prompt.sh << "EOF"
PROMPT_COMMAND="echo -ne '\e[1m${USER}@${HOSTNAME} : ${PWD}\e[0m\a'"
export PROMPT_COMMAND
EOF

The escape sequences above are BOLD, NORMAL, and BEL.

'/etc/profile.d/i18n.sh'

This script shows how to set some environment variables necessary for native language support. Setting these variables properly gives you:

  • the output of programs translated into your native language

  • correct classification of characters into letters, digits and other classes – this is necessary for Bash to accept keystrokes properly in non-English locales

  • the alphabetical sorting order correct for your country

  • proper default paper size

  • correct formatting of monetary, time and date values

Replace [ll] with the two-letter code for your language (e.g., “en”) and [CC] with the two-letter code for your country (e.g., “GB”). Also you may need to specify (and this is actually the preferred form) your character encoding (e.g., “iso8859-1”) after a dot (so that the result is “en_GB.iso8859-1”). Issue the following command for more information:

man 3 setlocale

The list of all locales supported by Glibc can be obtained by running the following command:

locale -a

After you are sure about your locale settings, create the /etc/profile.d/i18n.sh file:

cat > /etc/profile.d/i18n.sh << "EOF"
# Set up i18n variables
export LC_ALL=[ll]_[CC]
export LANG=[ll]_[CC]
export G_FILENAME_ENCODING=@locale
EOF

The LC_ALL variable sets the same value for all locale categories. For better control, you may prefer to set values individually for all categories listed in the output of the locale command.

The G_FILENAME_ENCODING variable tells applications such as Glib and GTK+ that filenames are in the default locale encoding and not in UTF-8 as assumed by default.

Other Initialization Values

Other initialization can easily be added to the profile by adding additional scripts to the /etc/profile.d directory.

/etc/bashrc

Here is a base /etc/bashrc. Comments in the file should explain everything you need.

cat > /etc/bashrc << "EOF"
# Begin /etc/bashrc
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>
# updated by Bruce Dubbs <bdubbs@linuxfromscratch.org>

# Make sure that the terminal is set up properly for each shell

if [ -f /etc/profile.d/tinker-term.sh ]; then
  source /etc/profile.d/tinker-term.sh
fi

# System wide aliases and functions.

# System wide environment variables and startup programs should go into
# /etc/profile.  Personal environment variables and startup programs
# should go into ~/.bash_profile.  Personal aliases and functions should
# go into ~/.bashrc

# Provides a colored /bin/ls command.  Used in conjunction with code in
# /etc/profile.

alias ls='ls --color=auto'

# Provides prompt for non-login shells, specifically shells started
# in the X environment. [Review the LFS archive thread titled
# PS1 Environment Variable for a great case study behind this script
# addendum.]

#export PS1="[\u@\h \w]\\$ "
export PS1='\u@\h:\w\$ '

# End /etc/bashrc
EOF

~/.bash_profile

Here is a base ~/.bash_profile. If you want each new user to have this file automatically, just change the output of the command to /etc/skel/.bash_profile and check the permissions after the command is run. You can then copy /etc/skel/.bash_profile to the home directories of already existing users, including root, and set the owner and group appropriately.

cat > ~/.bash_profile << "EOF"
# Begin ~/.bash_profile
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>
# updated by Bruce Dubbs <bdubbs@linuxfromscratch.org>

# Personal environment variables and startup programs.

# Personal aliases and functions should go in ~/.bashrc.  System wide
# environment variables and startup programs are in /etc/profile.
# System wide aliases and functions are in /etc/bashrc.

append () {
  # First remove the directory
  local IFS=':'
  local NEWPATH
  for DIR in $PATH; do
     if [ "$DIR" != "$1" ]; then
       NEWPATH=${NEWPATH:+$NEWPATH:}$DIR
     fi
  done

  # Then append the directory
  export PATH=$NEWPATH:$1
}

if [ -f "$HOME/.bashrc" ] ; then
        source $HOME/.bashrc
fi

if [ -d "$HOME/bin" ] ; then
  append $HOME/bin
fi

unset append

# End ~/.bash_profile
EOF

~/.bashrc

Here is a base ~/.bashrc. The comments and instructions for using /etc/skel for .bash_profile above also apply here. Only the target file names are different.

cat > ~/.bashrc << "EOF"
# Begin ~/.bashrc
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>

# Personal aliases and functions.

# Personal environment variables and startup programs should go in
# ~/.bash_profile.  System wide environment variables and startup
# programs are in /etc/profile.  System wide aliases and functions are
# in /etc/bashrc.

if [ -f "/etc/bashrc" ] ; then
        source /etc/bashrc
fi

# End ~/.bashrc
EOF

~/.bash_logout

This is an empty ~/.bash_logout that can be used as a template. You will notice that the base ~/.bash_logout does not include a clear command. This is because the clear is handled in the /etc/issue file.

cat > ~/.bash_logout << "EOF"
# Begin ~/.bash_logout
# Written for Beyond Linux From Scratch
# by James Robertson <jameswrobertson@earthlink.net>

# Personal items to perform on logout.

# End ~/.bash_logout
EOF

/etc/dircolors

If you want to use the dircolors capability, then run the following command. The /etc/skel setup steps shown above also can be used here to provide a ~/.dircolors file when a new user is set up. As before, just change the output file name on the following command and assure the permissions, owner, and group are correct on the files created and/or copied.

dircolors -p > /etc/dircolors

If you wish to customize the colors used for different file types, you can edit the /etc/dircolors file. The instructions for setting the colors are embedded in the file.

Finally, Ian Macdonald has written an excellent collection of tips and tricks to enhance your shell environment. You can read it online at http://www.caliban.org/bash/index.shtml.

Last updated on 2005-08-01 13:29:19 -0600